TEMA TELECOMUNICAZIONI
AD639R VoIP SIP PoE Repeater
MAS-AD639R-REV00EN
Page 10 of 30
7. OPERATING MODES
7.1.
Calls to devices
The AD639R device must be registered to a SIP PBX. It is normally inserted in the night ring group but can also be
called directly with its number. In any case, however, it will never reply (the only purpose is the activation of the
ringer). It is not possible to make a SIP call in Peer2Peer, it is not accepted by the system.
Using the ADAM software or a microphone base and the AD615 codec it is possible to broadcast an
announcement in streaming (in unidirectional mode).
7.2.
RELAY function
The internal relays can be used to connect any external flashers. In programming it is possible to decide whether
they should be activated during the ringing of the incoming call.
If they are not programmed to be activated during the call, they can also be controlled using the Tema ADAM
software (Audio Domain & Access Management software).
7.3.
Calls generated for the acquisition of external contacts for special signalings
These are the calls that the system generates on the line connected to itself to warn after the trigger of the alarm
input contact by the connected equipment (auxiliary devices or a button made available to users in the proximity of
the device), for the details of the operation see paragraph 8.5.