NDI
®
— 7 —
IR REMOTE CONTROLLER
POWER
Under normal working mode, short press POWER key, to enter standby
mode;
Press it again, the camera will start configuration. and go back to HOME
position.
It will go to preset position if power on model has been set before.
FREEZE
Short press FREEZE key to freeze/ unfreeze the image.
IRT (IR Transfer/IR Pass)
Open / close the IR pass function. Once press the IRT key, the camera will
receive and pass the IR remote control signal to the codec/terminal (via
VISCA IN port).
SET 1~SET4 ADDRESS SETTING
Long press for 3seconds until the key light ON, to set camera address.
CAM1~CAM4
（
CAMERA SELECTING
）
Short press to select the relative camera.
NUMBER KEY (1-9)
Set preset: long press (3 seconds) the number key to set preset.
Run preset: Short press the number key to run preset.
CLR PRE (CLEAR PRESET)
CLR PRE+ number key: to clear the relative preset.
Long press to clear all preset.
