NDI
®
— 21 —
EBRIGHT
Bright setting: 0~27, only valid under BRIGHT priority
mode.
Default: AUTO
BRIGHT
0~15
Default: 8
WD MODE
ON/OFF
Default: OFF
WD LEVEL
WDR Level: 1~6
Default: 1
BLC
ON/OFF
Default: OFF
IMAGE
WB MODE
Optional
：
ATW, MANUAL, C.T., AUTO, INDOOR, OUTDOOR,
PUSH
Default: ATW
Red GAIN
Red gain level: 0~255, only valid under manual white balance mode
Default: AUTO
Blue GAIN
Blue gain level: 0~255, only valid under manual white balance mode
Default: AUTO
COLOR
TEMPERATURE
Set the color temperature level: 2500~9900,
only effective in C.T. mode
Default: AUTO
FLICK
Anti-Flicker setting: 50/60HZ, to reduce the video flicker
Default: 50HZ
DZOOM
ON/OFF
Default: OFF
FOCUS MODE
Select focus mode
Default: AUTO
QUALITY
2D NR
2D noise reduction: the bigger value is, the less noise on image
is, the lower resolution is.
Default: OFF
3D NR
3D noise reduction: OFF/AUTO/0~4, the bigger value is, the
less motion noise on image is. High value will cause image
smear.
Default: AUTO
SHARPNESS
Sharpness setting: 0~15, the higher value is, edge of the image
will be sharpen
Default: 6
CONTRAST
Set contrast level
Default: 8
SATURATION
Set saturation.
Default: 8
GAMMA
Select gamma level
Default: 8
PTZ
SETTINGS
SPEEDBYZ
Speed By Zoom: proportional speed, the bigger the zoom is,
the slower the speed is
Default: ON
FLIP.HOR
Flip horizontal
Default: OFF
FLIP VER
Flip vertical
Default: OFF
