Step 2: Press Play
•
Press the “Play” button on the recording device. (The message will not begin playing until you
have issued a “Play” command through the T-311 (Step 4).
Step 3: Place Call
•
Place a call through the T-311 by issuing a “D” command at the computer or through an applica-
tion program. (Or, on an incoming call, proceed to Step 4.)
Step 4: Start Playing
•
Start playing the message at any time after the connection is established by issuing the command
AT*R2<CR>.
Step 5: Stop Playing
•
To stop the message without terminating the call, issue the command AT*R<CR>. The recording
will be stopped automatically when you use an H command to hang up the line.
T-311
Page 20
