Example: Standalone Call with Post Call Routing
With the above example programmed into the SLSS, you could do the
following:
❑
Dial the SLSS telephone number and listen for the first ring.
❑
Enter the Port 3 transfer code: 33 within 4 seconds.
Port 3 will ring and you will hear a high-pitched tone (i.e., the Transfer
Code Acknowledge Tone).
❑
Answer the Port 3 call and hang up the Port 3 device when finished.
❑
To route to another port on the SLSS during the same call, enter 44 when
you hear dial tone. Port 4 will ring, but you won’t hear the Acknowledge
Tone or three beeps.
❑
Hang up when the last call is finished.
Example: Standalone Call with Post Answer Transfer
With the above example programmed into the SLSS, you could do the following:
❑
Dial the SLSS telephone number and listen for the first ring. Answer the
call on the Port 1 telephone.
❑
To transfer the call to Port 3, enter: #03 within 15 seconds.
Port 3 will ring and you will hear a high-pitched tone.
Note: Post Answer Transfer allows a call to be re-routed ONLY from Port 1.
(The purpose is to allow the answering party to re-direct a call.
Substation Line Sharing Switch
Page 18