Telrad Connegy AdvanceIP Avanti 3000ip, User Manual

Page: 14 / 64

2-4 Avanti 3000ip and Avanti 3015ip sets
S
OFTKEYS
Softkeys have several functions, which change according to the
state of your telephone. A softkey's function, at any particular
moment, is indicated on the telephone display.
To operate a displayed function, press the corresponding soft-
key.
S
YSTEM PROGRAMMABLE BUTTONS
(A
VANTI
3015
IP SET
ONLY
)
The following buttons on your set have already been pro-
grammed to perform specific functions. The System Administra-
tor can program these buttons to perform other functions. If
the function of certain buttons does not match those appear-
ing in the figure at the beginning of this Guide, consult your
System Administrator.
U
SER
-
PROGRAM MABLE BUTTONS
(A
VANTI
3015
IP SET ONLY
)
Some of the buttons on your telephone may be user-program-
mable SPEED DIAL or MEMORY buttons. You may program
these to access extensions, features or outside lines.
The user-programmable buttons have dual-color light indica-
tors. The color and flash rate of the indicators show the status
of the programmed line, feature or extension.
F
IXED FEATURE BUTTONS
The following fixed feature buttons appear on your Avanti
3000ip and Avanti 3015ip sets:
[HOLD]
This button places a call on hold.
[FEATURE]
Press [FEATURE] and then dial a feature access code to acti-
vate features (see the Feature codes table at the end of this
guide).
3015ip-3000ip.book Page 4 Friday, September 30, 2005 4:06 PM