Telrad Connegy AdvanceIP Avanti 3000ip, User Manual

Page: 36 / 64

3-16 Avanti 3000ip and Avanti 3015ip sets
3. Press [*] .
If you have several DNs assigned to your extension, you can
program call forwarding for all your DNs at once (provided
you have been authorized to do so by system program-
ming).
4. Dial the code designating the calls you want forwarded:
5. Enter the new destination for Call forwarding.
On the Avanti 3015ip, instead of dialing the extension
number, you may press a MEMORY button programmed
with an extension number (for internal calls only).
You may also press a SPEED DIAL button (or press
[SPEED
DIAL/PROGRAM] and a SPEED DIAL number).
Calls are forwarded to the number stored in the MEMORY
button or SPEED DIAL memory. If you change the contents
of the SPEED DIAL memory, calls are forwarded to the new
destination.
6. Hang up.
T
O CANCEL CALL FORWARDING
1. If your set does not have DN buttons, skip to step 2.
If you want to cancel forwarding for a specific DN, first
press the desired DN button.
To program Dial
Call forward always [F][L]
or
[3][5]
Call forward busy [F][B]
or
[3][2]
Call forward no answer [F][N]
or
[3][6]
To program Dial
All calls [A] or [2]
External calls [E]
or
[3]
Internal calls [I] or [4]
3015ip-3000ip.book Page 16 Friday, September 30, 2005 4:06 PM