Telonics TCA-500C Combo Amp
45
PB-009289 Rev E
(O
PTIONAL
)
E
XTERNAL
C
ONTROL
U
NITS
(C
ONTINUED
)
H
ANDY
P
ATCH
MIDI
C
ONTROLLER
MC100
A)
The Handy Patch comes with a cable (A above) to connect to the TCA-500C. On one end
is a five pin DIN connector with a pigtail power connector. This five pin DIN connects to
the G-Major 2 MIDI IN jack. The pigtail power connector should be plugged into the
24VDC jack as shown in the picture above. The other end of the cable has a seven pin
DIN connector that plugs into the Handy Patch. The Handy Patch will now turn on when
the TCA-500C is powered up.
B)
The G-Major 2 has a Switch Out jack on the back that uses internal relays to switch the
Tip or the Ring terminal on the jack to the Sleeve (ground). This output will allow the G-
Major 2 to control the Foot Switch input jack on the TCA-500C, which controls the
internal Reverb and TBRO effects. A ¼ inch TRS cable (B above) should be connected
between the Switch Out jack on the G-Major 2 and the Foot Switch jack on the
TCA-500C as shown in the picture above.
NOTE: See the Handy Patch User’s Manual for more detailed
information.
(A)
Handy Patch cable
plugs
(B) 16 inch long ¼ inch TRS
cable
