6
•
Program push-button
The program push-button is placed on the panel, in the vicinity of the GSM antenna
socket. Functions of the push-button are the following:
-
Entering programming mode:
for this keep the button pressed for 3…5 seconds,
then release (see „Programming” and „LED signals” chapters)
-
Setting time of day for test report sending:
press the program button shortly
three times consequently in the desired time of day. Thereafter the test report is
sent and the following ones are sent in the interval entered for test report period
setting.
-
Stop notifications in progress:
pressing the button shortly (>1sec) stops all
notifications in progress, then GSM signal strength is displayed
-
GSM signal query:
after pressing the button shortly (>1sec), the number of green
blinks indicate the level of the GSM signal on 10-point scale.
Attention! This operation stops at the same time all event signalizations that may
be occasionally in progress!
-
Restore factory default settings (reset):
this function restores all parameters to
factory default, according to “Adjustable parameters” table. For this keep the
button pressed for at least 10 seconds, then release (see „LED signals” chapter)
2 Programming
Programming of the module can be performed through call center. For this the program
button must be pressed for 3-5 seconds, then released. Thereafter the module enters the
programming mode and accepts call to its SIM card from any phone number within
3 minutes. After calling the module, menu item selection and settings can be performed
in the voice menu with DTMF commands, by pressing the correspondent keys on the
phone. The module exits programming mode automatically if the call is hanged up or if
no key is pressed for 2 minutes (in this case it hangs up the call itself).
2.1 Adjustable parameters
Parameter Default Parameter Default
Input 1 (NO/NC)
NO
User account ID
0000
Input 2 (NO/NC)
NO
Test report period (0-99 days)
7
Relay timer 0-9999s
1s
SMS forwarding (Y/N)
Yes
User phone numbers 1…4
-
Supply voltage monitoring (Y/N)
Yes
Confirmation from 1…4 ph.nrs
No
Voice messages 1,2
Siren tone
Monitoring station phone nr
-
Caller identification (Y/N)
No
Contact ID event codes 1...4
130,130,302,602
