Telit EZ10-GPRS/-PCS
Product Description
80269ST10014a, Rev. 3 – 26/09/05
Reproduction forbidden without written authorization by Telit Communications S.p.A.
Page 6 of 74
All Rights reserved – Right of modification reserved
1 Overview
Aim of this document is the description of features, functions and interfaces of the
Telit EZ10
TERMINAL FAMILY of wireless GSM/GPRS cellular modems.
Since these Terminals are ready
for use as a subsystem for wireless connections, Safety Information and basic instructions for
taking the EZ10 into operation are included, as well as guidance to other documentation and
practical hints for the first steps.
All of the
Telit EZ10 Terminals
are GSM Mobile Stations (MS class B) and capable of using the
GSM Circuit Switched Data (CSD), Fax and Short Message Services (SMS).
The frequency bands, GPRS class, availability for GSM Voice Services and the configuration of the
RJ11 connector in relation to the names of the products are reported in the following table:
Frequency Bands
GPRS
GSM
Voice
RJ11 AUX
Connector
Product Name
EGSM900/1800 MHz
Dual-Band
Class 8
Yes
AUDIO
Telit EZ10-GPRS
EGSM900/1800/ PCS1900 MHz
Tri-Band
Class 10
NO
GPIO
Telit EZ10-PCS
(with PYG Option)
For the use of GSM
Voice
Services, an external microphone, earphone or amplified loudspeaker
needs to be connected to the RJ11 AUX=AUDIO connector of the
Audio
version of the EZ10
Terminal.
The
PYG Option
allows to perform stand-alone operations with the
EASY SCRIPT
feature,
interpreting user-defined scripts in
PYTHON
language, e.g. to read external sensors connected to
the General Purpose Inputs / Outputs on the RJ11 connector. Refer to the chapter about Software
Features in this Product Description.