Telit Wireless Solutions EZ10 Series Product Description Download Page 59

Page: 59 / 74

Telit EZ10-GPRS/-PCS

Product Description

80269ST10014a, Rev. 3 – 26/09/05

Reproduction forbidden without written authorization by Telit Communications S.p.A.

Page 59 of 74

4 AT Command Interface

The

Telit EZ10 wireless modem

can be driven via the serial interface using the standard AT

commands

. The

Telit EZ10 wireless modem

is compliant with:

1. Hayes standard AT command set, in order to maintain the compatibility with existing SW

programs.

2. ETSI GSM 07.07 specific AT command and GPRS specific commands.

3. ETSI GSM 07.05 specific AT commands for SMS (Short Message Service) and CBS (Cell

Broadcast Service)

4. FAX Class 1 compatible commands

Moreover the

Telit EZ10 wireless modem

supports also Telit proprietary AT commands for

special purposes.

The following table lists all supported AT commands and related brief description.

The GM862 / TRIZIUM Family AT Command Description document, code 80264ST10013a, shows
a dedicated detailed description of all supported AT commands and how to use the AT commands
with the

Telit EZ10 wireless modem

through some example scripts.

The AT is an ATTENTION command and is used as a prefix to other parameters in a string. The

AT command combined with other parameters can be set up in the communications package or
typed in manually as a command line instruction.

Summary of Contents for EZ10 Series











































































Search results

Summary of Contents for EZ10 Series

Reviews:

Related manuals for EZ10 Series

Brands by name

Popular brands

Telit Wireless Solutions EZ10 Series, Product Description

Search results

Summary of Contents for EZ10 Series

Reviews:

Related manuals for EZ10 Series

Brands by name

Popular brands