Telit EZ10-GPRS/-PCS
Product Description
80269ST10014a, Rev. 3 – 26/09/05
Reproduction forbidden without written authorization by Telit Communications S.p.A.
Page 28 of 74
All Rights reserved – Right of modification reserved
2.9.11
Characters management
Availability of lowercase, uppercase and IRA characters. (International Reference Alphabet)
In SMS PDU mode all character sets are supported.
2.9.12
SIM related functions
Activation/deactivation of the numbers stored in phone book FDN, ADN and PINs. Extension at the
PIN2 for the PUK2 insertion capability for lock condition.
Do not insert or remove the SIM when the product is in power saving mode.
NOTE: The SIM (Subscriber Identity Module) from the Network Operator or Service Provider can
be configured in different ways, e.g. related to
•
The presence of SIM Applications (not supported by the current Software of EZ10
Terminals),
•
The possibility to de-activate the necessity to enter the PIN (Personal Identification
Number) as condition for registering in the network;
•
The possibility that the Terminal can be locked by factory SW settings to a certain SIM of a
certain Network Operator.
•
The presence and format of certain phone book directories (PB, FDN, ADN) or SMS
memories.
•
The presence, content and format of other registers in the SIM, e.g. network operator’s
name, list of preferred networks (names change from time to time), etc.
•
The possibility to roam between several mobile networks even in the home country.
2.9.13
Call status indication
By AT commands and Status LED.
2.9.14 LED
Indicators
The EZ10 Terminals have 2 LED indicators, one for Power, one for Status.
2.9.14.1 Power
LED
When on, the green Power LED indicates that the supply voltage is arriving at the GSM Engine
inside the EZ10 Terminal.