manualshive.com logo in svg

Telindus 1132, User Manual

Share
Download
Telindus 1132 User Manual Download Page 37

TELINDUS 1132/1133 

Web 

Interface User’s Guide 

 

 

 

Version 2.0 

Page 37/57 December 

2004 

 
To delete filter rule(s), select the filter rule entry to delete in the "Delete" selection box. Note that 
multiple deletion is possible. Once all the desired filter rule(s) is/are selected for deletion, press 
the "Apply" button. The "Select All" select box can also be used to delete all the filter rule. It 
provides a quick method of selecting all filter rules for deletion. 
 
The "Enable Bridge Filters" button allow the user to enable or disable bridge filtering. It can be 
set/unset during any add/edit/delete operation. It can also be set/unset independently by just 
pressing the "Apply" button. 
 

Note: On a windows based machine, to find a MAC address, at a dos prompt type 

ipconfig /all

. 

 
 
Note: There are three hidden filter rules within the bridge filter table. These rules are entered 
automatically by the system to ensure the user does not "lock" themselves out of the system. The 
first rule allows any and all ARP frames through the system. The second rule allows all IPv4 
frames with the destination MAC address of the bridge to go through. The third rule allows all 
IPv4 frames with the source MAC address of the bridge to go through. 
 
 

 

 

Figure 26 (Bridge Filters) 

 

The Apply button will temporarily save these settings. To make the change permanent, you need 
to click on 

Save All Settings

.  At the System Commands page under the TOOLS, click on 

Save 

All

. 

Summary of Contents for 1132


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands