IP-223 to RTS Intercom Products
6
AN-DISPATCH-035
3.1.1
Multicast Address Setup Window
The
Multicast Address Setup
window, shown in Figure 3, is used to configure the
line type for Lines 1 and 2.
To
configure Lines 1 and 2 for an LMR configuration
, do the following.
1. Click
Multicast Address Setup
.
2. From Line 1’s Line Type drop down menu, select
Local Mode
.
3. From Line 2’s Line Type drop down menu, select
Local Mode
.
4. Click
Submit
.
The Multicast Address Setup configuration is temporarily saved.
5. Click
Save to EEPROM
.
The EEPROM window appears.
6. Click
Save Parameters
.
All configurations are permanently saved to the IP-223 console.
FIGURE 3. Multicast Address Setup Window, Line to Line Configuration
