7
Switching TV signal
from the antenna
While your building is connected
to the fibre optic network, the TV signal
is also switched to the Lounea cable TV
network.
To be able to watch TV in the cable TV network, you need a compatible
set-top box or television (DVB-C compatible).
Due to the change in signal, you need to perform a channel search for your
set-top box or television
. Learn more from your device’s operating instructions.
Some models may also require you to reset to factory settings. Please note that
resetting to factory settings deletes all television/set-top box settings.
Freely available basic channels and their channel numbers, as well as our versatile
selection of channel packages, are available on our website at
lounea.fi.
TV card and channel packages
If you have subscribed to channel packages and/or use a TV card from your
previous operator, these will no longer work in this building. Unless you have
already terminated these services, please contact your old operator’s customer
service and terminate your card and/or channel package. You are not bound by
fixed-term contracts, as your old operator is now unable to provide the signal
for you.
You can order a new TV card and more high-quality programming from Lounea’s
wide selection. Get to know our selection at
www.lounea.fi
or contact our
customer service, tel. +358 (0)800 30300.
See also Viewing high-definition (HD) TV channels on page 9
.
Tip!
Lounea customer support helps you with your problems.
Tel. +358 (0)800 30304 or [email protected].
The service is available 24 hours a day.
Note!
You can also listen to radio channels through the cable TV.
Instructions and frequencies are available at
www.lounea.fi
.
!
