TW-EA510 version 4 ADSL2+, WLAN 802.11g, VPN, Firewall Router
Chapter 4:Configuration
43
Always on:
If you want the router to establish a PPPoA session when starting up and to
automatically re-establish the PPPoA session when disconnected by the ISP.
Connect on Demand:
If you want to establish a PPPoA session only when there is a packet
requesting access to the Internet (i.e. when a program on your computer attempts to access the
Internet).
Idle Timeout:
Auto-disconnect the broadband firewall gateway when there is no activity on the line for a
predetermined period of time.
Detail:
You can define the destination port and packet type (TCP/UDP) without checking by timer.
It allows you to set which outgoing traffic will not trigger and reset the idle timer.
RIP:
RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function.
MTU:
Maximum Transmission Unit. The size of the largest datagram (excluding media-specific headers)
that IP will attempt to send through the interface.
TCP MSS Clamp:
This option helps to discover the optimal MTU size automatically. Default is enabled.
