TW-EA510 version 4 ADSL2+, WLAN 802.11g, VPN, Firewall Router
Chapter 3: Basic Installation
16
Factory Default Settings
Before configuring your, you need to know the following default settings.
Web Interface (Username and Password)
Username: admin
Password: admin
The default username and password are “
admin
” and “
admin
” respectively.
LAN Device IP Settings
IP Address: 192.168.0.254
Subnet Mask: 255.255.255.0
ISP setting in WAN site
RFC-1483 Bridged IP LLC
DHCP server
DHCP server is enabled.
Start IP Address: 192.168.0.100
IP pool counts: 100
LAN and WAN Port Addresses
The parameters of LAN and WAN ports are pre-set in the factory. The default values are shown below.
LAN Port
WAN Port
IP address
192.168.0.254
Subnet Mask
255.255.255.0
DHCP server function
Enabled
IP addresses for
distribution to PCs
100 IP addresses continuing from
192.168.0.100 through 192.168.0.199
The RFC-1483 Bridged IP LLC
function is
enabled
to
automatically get the WAN IP
address from the ISP.
Attention
If you ever forget the username/password to login to the router, you may
press the RESET button up to 6 seconds to restore the factory default
settings.
Caution
: After pressing the RESET button for more than 6 seconds, to be sure you power
cycle the device again.
Attention
