TW-EA510 version 4 ADSL2+, WLAN 802.11g, VPN, Firewall Router
Chapter 4:Configuration
32
Active PC in LAN displays a list of individual Ethernet device’s IP Address & MAC Address which
connecting to the router.
You can easily by checking the box next to the IP address to be blocked or allowed. Then,
Add
to insert
to the Ethernet Client Filter table. The maximum Ethernet client is 16.
Wireless
Mutiple APs
AP Index:
you can select “ Main”, “ Virtual AP1” and “Virtual AP2”
Parameters
WLAN Service:
Default setting is set to
Enable
. If you do not have any wireless, both 802.11g and
802.11b, device in your network, select
Disable.
Mode:
The default setting is
802.11b+g
(Mixed mode). If you do not know or have both 11g and 11b
devices in your network, then keep the default in
mixed mode
. From the drop-down manual, you can
select
802.11g
if you have only 11g card. If you have only 11b card, then select
802.11b
.
ESSID:
The ESSID is the unique name of a wireless access point (AP) to be distinguished from another.
For security propose, change the default
wlan-ap
to
a unique ID name to the AP which is already built-in
to the router’s wireless interface. It is case sensitive and must not excess 32 characters. Make sure your
wireless clients have exactly the ESSID as the device, in order to get connected to your network.
Note:
It is case sensitive and must not excess 32 characters
.
ESSID Broadcast:
It is function in which transmits its ESSID to the air so that when wireless client
searches for a network, router can then be discovered and recognized. Default setting is
Enable.
