TeleWell TW-EA200, Manual

Page: 71 / 91

TW-EA500/EA200 ADSL Modem/Router
34
Source IP Address:
Enter the incoming or outgoing packet’s source IP address(es).
Source Port:
Check the TCP or UDP packet’s source port number(s).
Destination IP Address:
Enter the incoming or outgoing packet’s destination IP address(es).
Destination Port:
Check the TCP or UDP packet’s destination port number(s).
If the DHCP server option is enabled, you have to be very careful in assigning the IP
addresses of filtered private IP range in order to avoid conflicts because you do not
know which PC in LAN is assigned to which IP address. The easiest and safest way is
that the filtered IP address is assigned to specific PC that is not allowed to access
outside resource such as Internet. You configure the filtered IP address manually to
this PC, but it is still in the same subnet with the router.
3.4.3.4.2 Bridge Filtering
Enable Bridge Filtering:
Check
Yes
to enable this function or check
No
to disable.
Source MAC:
Enter the source MAC address.
Destination MAC:
Enter the destination MAC address.
Type:
Enter the Ethernet type.
~
Block
~
Forward:
Check
Block
if you want to block requests from the source MAC
address sending to the destination MAC address. Check
Forward
if you want to forward
requests from the source MAC address sending to the destination MAC address.