TeleWell TW-EA200, Manual

Page: 63 / 91

TW-EA500/EA200 ADSL Modem/Router
26
PPP:
If your encapsulation is set to be PPPoE or PPPoA, the following fields must be entered.
Service Name:
This item is for identification purpose. If it is required, your ISP will provide
you the information. Maximum input is
31
alphanumeric characters.
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Disconnect Timeout seconds
: Auto-disconnect the ADSL Router when there is no activity
on the line for a predetermined period of time. You can input any number from
0 to 32767
. The
default value is
0
seconds.
MRU
: Maximum Receive Unit indicates the peer of PPP connection the maximum size of the
PPP information field this device can be received. The default value is 1492 and is used in the
beginning of the PPP negotiation. In the normal negotiation, the peer will accept this MRU and
will not send packet with information field larger than this value.
MTU:
Maximum Transmission Unit indicates the network stack of any packet is larger than this
value will be fragmented before the transmission. During the PPP negotiation, the peer of the
PPP connection will indicate its MRU and will be accepted. The actual MTU of the PPP
connection will be set to the smaller one of MTU and the peer’s MRU. The default value is 1492.
MSS:
Maximum Segment Size is the largest size of data that TCP will send in a single IP packet.
When a connection is established between LAN client and a host in the WAN side, the LAN
client and the WAN host will indicate their MSS during the TCP connection handshake. The
default value is 1492.
Authentication:
Default at “Auto”.
Automatic Reconnect:
Check to enable this device to automatically re-establish the PPPoE
session when disconnected by ISP.
DHCP client enable:
Check to enable the DHCP client function if you want the device to get an
IP address automatically from your ISP.
Host Name:
Enter the name of your work group.