TeleVideo TeleCLIENT TC7370 Manual Download Page 45

Page: 45 / 68

45 / 69

/ 69

–

Operation

49. 4.

Operation

Operating the TeleCLIENT TC7370 includes using the

TeleCLIENT Connection Manager

to set up

network connections, and the hot key combinations to switch between active sessions. This chapter

explains how to use the

TeleCLIENT Connection Manager

and operation hot keys.

It includes the following sections:

71.

•

Powering On

72.

•

Using the

TeleCLIENT Connection Manager

73.

•

Connecting to a Network Server

74.

•

Using the TeleCLIENT TC7370 Hot keys

75.

•

Logging Off

50.4.1.

Powering On

The TeleCLIENT TC7370 Windows-based terminal is powered by an AC to DC adapter, which connects to the rear panel DC-in jack.

Notice the

ON/OFF

switch located on the front panel (refer to Chapter 2

–

Hardware Installation). Use this switch to power the

TeleCLIENT TC7370 on and off.

To power-off the TeleCLIENT TC7370, press the ON/OFF switch. To re-start, press the ON/OFF switch briefly.

WARNING:

Follow the instructions above carefully to avoid accidental power shut-off to the

TeleCLIENT TC7370.

51.4.2.

Using the TeleCLIENT Connection Manager

The

Tele

TeleCLIENT Connection Manager

CLIENT Connection Manager

allows you to create and manage your TeleCLIENT TC7370

’

s network connections. Whenever the

TeleCLIENT TC7370 starts up, the

TeleCLIENT Connection Manager

window automatically displays

(see Figure 4-1) unless it is an initial start up or auto-start connection was set by a user. This window will also appear whenever you

log-off or disconnect from a session.

Summary of Contents for TeleCLIENT TC7370





































































Search results

Summary of Contents for TeleCLIENT TC7370

Reviews:

Related manuals for TeleCLIENT TC7370

Brands by name

Popular brands

TeleVideo TeleCLIENT TC7370, Manual

Search results

Summary of Contents for TeleCLIENT TC7370

Reviews:

Related manuals for TeleCLIENT TC7370

Brands by name

Popular brands