--
29
29 / 69
/ 69
–
57. 5.
When the
Pass
or
Fail
window comes up immediately after the image
testing. Click
Pass
if the image shows properly.
Note
that the default
button is
Fail
. When you click
Pass
the TeleCLIENT should reboot again.
58. 6.
Click
OK
.
Setting Screen Saver
To set screen saver complete the following steps:
19. 1.
Make sure the ‘Enable Screen Saver’ box is checked.
Warning:
Screen saver
must be enabled
to activate the Energy Star® energy conservation mode.
59. 2.
To set the time TeleCLIENT TC7370 waits before activating the screen
saver, enter the new value in the Wait field (or use the up and down arrows).
The default wait value is 12 minutes.
60. 3.
Click
OK
.
20.3.2.4.
Changing Network Settings
In addition to changing the network settings by resetting the factory defaults and using the setup wizard again, you can also use the
TeleCLIENT Terminal Proper
TeleCLIENT Terminal Properties
ties
window for this task.
To change network settings, complete the following steps:
21. 1.
Select the
Network
tab in the
TeleCLIENT Terminal Properties
window (Figure 3 -18).
Figure 3-18
TeleCLIENT Terminal Properties – Network Tab
Summary of Contents for TeleCLIENT TC7370
Page 1: ... 1 1 69 69 ATTACHMENT E USER S MANUAL ...
Page 2: ... 2 2 69 69 ...
