The IP address of Plixus AE-R must be in the same range as the IP address of the Plixus
Gateway.
If you want to combine inputs (e.g. a wireless microphone) and/or outputs (e.g. external
speakers) with the Plixus Gateway, make sure that the Plixus Gateway is directly connected to
Plixus AE-R, and that the
inputs/outputs are handled by Plixus AE-R
.
Connecting The Gateway To Confidea WAP G4
If your Central Unit is a Confidea WAP G4 device, refer to the diagram below to connect the Plixus
Gateway.
The Confidea WAP G4 is using balanced audio signals while the Plixus Gateway is using
unbalanced audio signals. To solve this problem, we highly recommend to use audio
converters.
The Plixus Gateway can be connected either to the WAN port, the LAN port or both. In case
both the WAN and LAN ports are used, two switches and two DHCP servers will be necessary.
HARDWARE INSTALLATION
35
