H30EVOLUTION handheld DVB meter /
Analyzer
4
Safety requirements
Product inspection
- Inspect the equipment for shipping damage.
Should any damage be discovered, immediately
file a claim with the carrier.
Read and Follow All Instructions
- All the safety and operating instructions should
be read prior to and followed while operating
this product.
Do not obstruct the ventilation slots
Cleaning
- Follow the cleaning instructions contained in
the Maintenance section of this manual.
Attachments
- Do not use attachments that are not approved
by the product manufacturer.
Water and Moisture
- This product is splash water resistant but is not
submersible.
- Do not place objects filled with liquids on or
near the meter, such as glasses.
Power Sources
- This product should be operated only from the
type of power source specified (12VDC - 2A).
- Ensure that the voltage applied to the power
connector does not exceed 15V. Higher voltages
could damage the equipment
- Maximun consumpted current: 2A
Grounding or Polarization
-
Do not bypass or defeat electrical plug
polarization or grounding. Doing so will violate
the warranty and may pose a risk of fire or
electrocution.
Wire Protection
- Ensure all connected wiring is routed correctly
to avoid damage including pinching, excessive
bends, or compression.
Electrical Supply, Grounding, and Surge
Protection
- Ensure that all local or national electrical codes
are followed.
Power Lines
- Always use caution and avoid operating this
or any connected equipment near uninsulated
power lines or any other hazards.
Servicing
- There are no user serviceable parts except the
battery. Do not attempt to service this product or
remove covers other than the battery cover. Refer
all servicing to qualified service personnel. Follow
the instructions in this manual when replacing the
battery.
Heat
- The product should be situated away from heat
sources such as radiators, heat registers, stoves, or
other products that produce heat.
- Do not place naked flame sources on the meter,
such as lighted candles.
Maximum current consumed by the meter: 2A
Battery
-
Battery must be replaced by qualified
personnel, following the steps mentioned in the
corresponding section.
- If the battery is replaced, the new one must
have the same features, because there is risk of
explotion. Furthermore, the new battery must be
approved by the manufacturer. Otherwise, the
company is not responsible for damages caused
to the meter.
- Battery features:
Li-Ion
2600mAh 7.26V 19 Wh
Symbols and safety labels
Recycle or dispose of used electronic
devices properly.
Remove the battery from the equipment
following the instructions given in this
manual and dispose it properly
Replace the batteries only with the same
type.
Input power / Alimentación: 12V ; 2A, 24W
0916
Ref. 593304
Recycle or dispose of used electrical and
electronic devices properly.
H30Flex
100% Designed, Developed, and
Manufactured by Televes Corporation
Replace the batteries only with the same type.
Reemplace las baterías sólo por el tipo
recomendado.
Deposite los residuos de aparatos eléctricos y
electrónicos en los contenedores al efecto.
S.N.- 09169999900011
Made in Spain
DVB-S/S2 + DVB-T/T2 + DVB-C
A00383
Connector / Conector: P1J
Sample. Not for sale
Input power / Alimentación: 12V ; 2A, 24W
0916
Ref. 593304
Recycle or dispose of used electrical and
electronic devices properly.
H30Flex
100% Designed, Developed, and
Manufactured by Televes Corporation
Replace the batteries only with the same type.
Reemplace las baterías sólo por el tipo
recomendado.
Deposite los residuos de aparatos eléctricos y
electrónicos en los contenedores al efecto.
S.N.- 09169999900011
Made in Spain
DVB-S/S2 + DVB-T/T2 + DVB-C
A00383
Connector / Conector: P1J
Sample. Not for sale
