TX001-00-00 Rev 101 QuickSilver DV202S Video Transmitter
Introduction
••••
3
The Transmitter can
be expanded to handle
additional cameras,
relays and alarms
using a CRU. A
Transmitter can be
outfitted to support up
to 6 CRUs. Each basic
CRU has 4 camera
inputs and 4 alarm
inputs. A CRU can be
equipped with a CM-4
Camera option board
and a RM-16-relay
Expansion Card to
increase its capability
to 8 camera inputs, 8
alarm inputs and 16
relay outputs.
With 6 fully equipped
CRUs connected in
tandem, the total
system can support 48
cameras, 48 alarm
inputs and 98 relays.
Refer to Figure 2.
The system also
supports simplex
(listen) and duplex (simultaneous talk/listen) audio when the Transmitter is equipped with the optional AUDIO
BD Internal Audio Card, Microphone and Speakers. See Figure 3 for a basic system audio diagram.
Warning: Audio is designed to provide two-way communication and should not be used as a covert
listening tool.
In addition, the Transmitter is capable of providing multi-channel audio using optional Louroe Electronics
hardware.
The system also supports connection to an several manufactured Camera Domes via an RS-232 or RS-
422/485 connection. Refer to document TX006, Pan, Tilt and Zoom setup instructions for details on how to
connect these.
Figure 3
Basic Audio Setup
