2
••••
Introduction
TX001-00-00 Rev 101 QuickSilver DV202S Video Transmitter
The QuickSilver system offers a solution for remote video control and monitoring requirements. Composite
video, audio (optional), and control signals are transmitted over ordinary telephone lines (PSTN, ISDN and
cellular type) as shown in Figure 1. Software information can be found in TeleSite Manual TX001-10.
The core system is comprised of the DV202S Transmitter, QS Receiver Software, a PC-type computer and a
pair of Modems. The Transmitter and a Modem are installed and configured at the remote site. The Receiver
software and remaining Modem are installed into the computer at the local site. Each remote site can then be
accessed by the local site to begin receiving video. The software provides complete configuration, operation
and monitoring of the remote-site devices.
Figure 1
Basic QuickSilver System
Figure 2
Expanded QuickSilver System
