Installation
Page 24
3.
Align the module in the Data Shelf guide grooves.
4.
Gently slide the module into the Data Shelf until it rests against
the edge connector.
5.
Firmly push the card in to seat the edge connector.
6.
To install additional PC cards, repeat steps 2 through 5.
7.
When you finish, close the hinged front panel.
Removing PC Cards
PC cards can be removed while the Data Shelf is powered on. To
remove PC cards:
1.
Lower the Data Shelf’s hinged front panel.
2.
Pull the card pullers on the PC module to slide the PC card out
through the front of the Data Shelf (see Figure 2-5).
3.
To remove additional PC cards, repeat step 2.
4.
When you finish removing PC cards, raise the hinged front panel.
Summary of Contents for RM16M - Versatile Rack Mounting Chassis
