Telemotive telePendant, Programming And Users Manual, Page: 29 / 31

Section 5 – Programming (Continued)
29 8/2/2004
6. Select a name you want for the
telePendant
unit being programmed and tap “OK”.
7. Wait for confirmation text on PDA screen:
8. After programming, always operationally test
all the functions of the transmitter by using the
appropriate receiver with the MR relay disabled
before retuning transmitter to service.
Receiving (Reading) the
telePendant
Programming.
To read a program file from the
telePendant
Transmitter:
1. Line up the PDA’s infrared port and go to bank
5 as in steps 1 to 3 above, with the transmitter
ON. Select “Admin”
2. Select “Receive Setting.”
3. PDA will confirm reception and automatically
display current programming in the
telePendant
unit.
Reading the telePendant ID.
To read an identity (an identity is the name that was
programmed in by step 5 of Sending a Program To The
telePendant , listed above) from the telePendant
Transmitter:
1. Line up the PDA’s infrared port and go to bank
5 as in steps 1 to 3 above, with the transmitter
ON. Select “Admin”
2. Select “Transmitter ID.”
3. PDA will read: Name, Serial/Job Number, and
Manufacturing information of the telePendant
unit.
Reading the
telePendant
History.
To read Service information from the
telePendant
Transmitter:
1. Line up the PDA’s infrared port and go to bank
5 as in steps 1 to 3 above, with the transmitter
ON. Select “Admin”
2. Select “History”
4. Unit will read: Past Service Orders of the
telePendant unit.
Reading the PDA Transmitter Software Version.
To read PDA Software Version from the telePendant
Transmitter:
1. Select “Admin”
2. Select “About”
3. Unit will read: Transmitter Programmer
Software Version number.
Beaming (Sending) the Configuration(s) to another
PDA.
To send a configuration setting to another PDA.
1. Line up the PDA’s infrared port as, with the
other PDA, which is turned ON.
2. Select “Beam Setting.”
3. Select the item(s) you wish to send.
4. Wait for confirmation text on PDA screen:
Error Statements and Codes.
Tx Type Mismatch; If while attempting to program a
telePendant
you receive an error code such as “Error
AAAB” you have selected a different style transmitter
in the PDA than you are attempting to program. Most
common cause is trying to program a 2-speed
telePendant
with 3-speed selected or visa versa.
NOTE
TO PROGRAM OR READ DATA FROM
THE
telePendant,
THE TRANSMITTER
MUST BE TURNED ON AND IN BANK
FIVE (5).