4
4.3 Auxiliary Connections
Power and control of the Telemetrics Trolley and Televator units is
accomplished using the auxiliary connector on the pan/tilt. It is important to
remove power from the pan/tilt prior to connecting or disconnecting the
auxiliary cable. Damage may occur if the unit is powered when connecting or
disconnecting the cable.
Note
: Refer to Appendix for information on Aux Axis
Soft Limit configuration.
Figure 4. Trolley/Televator Cable CA-S2-AUX
5.0 Camera Power & Camera Control
Telemetrics pan/tilt systems are capable of providing power and data to virtually all
manufacturers’ cameras. A Telemetrics power supply that includes a 15V module
for the camera must be used when camera power is required. In addition, the
Telemetrics control panel must be configured to accept the camera ROP to provide
camera control. See Table 3 for currently available accessory cables.
Table 1 Camera Power and Data Cables
Camera
Power
Data
Power/Data
Sony
DXC-950/990
CA-S2-P-DXC990 CA-S2-D-DXC990 CA-S2-PD-DXC99
Panasonic
AW-E600/800
CA-S2-P-E600 CA-S2-D-E600
*CA-S2-PD-E600
Hitachi
HV-D15
CA-S2-P-HVD15 CA-S2-PD-HVD15
Hitachi
Z-3000W
CA-S2-XLR-4F
CA-S2-PD-Z3000
*Note: The Panasonic Camera Control Cable requires removal of the screw
terminals on the 50 Pin connector.
