6
Support protocols of UDP, ARP, ICMP, and IGMP
Support HD/SD program transmitting
Support WEB/SNMP-based management
Support online remote upgrade
Language support: Chinese and English
Power failure memory recovery
Support device configuration import/export
Powerful background configuration and network management & monitoring
* Please refer to Annex A for detailed technical specifications.
§
1.3 Front Panel
As shown in figure 1, there are one LCD display
、
one6-key keypad and three LED indicators on the front
panel of LAVISION-868FTA.
The model type and logo notification information will be displayed on the LCD screen during the device
initialization stage. User can check part of the working status of device, and set part of the parameters of
LAVISION-868FTAby exploring a menu realized by buttons/LCD screen after system initialization, see
section §3.3 for details.
The POWER LED will be light if the device powers on successfully.
The STATUS LED will show some working status of the device, see section§3.3 for details.
The ALARM LED will indicate warning messages of the device, if exists, see section §3.3 for
details.
Fig.1
Front Panel View of LaVision-868FTA
§
1.4 Rear Panel
As shown in figure 2, the rear panel of LAVISION-868FTAconsists of one power supply connector, one
power switch, one management port, eight RF input ports, one eight IP output ports, and a grounding
point.
Power Input Port: To connect to 100~240V 50/60Hz AC input;
Power Switch: To turnLAVISION-868FTA on or off;
Management Port: RJ45 interface, to connect to management server via 100BaseT or Gigabit
Ethernet;
RF Input Port:F10-75J connector, to connect to satellite and microwave signals of LNB/MMDS
down converter;
Data Output Port:RJ45 interface, to connect to data destination equipments of
LAVISION-868FTA;
Grounding Point: To connect the device with conductive earth. Please make sure of proper
Summary of Contents for Lavision-868FTA
Page 1: ...868FT MODE LAVISIO...
