
49
Fig.59
Select AC
AC Selection will display 4 AC information for each CAS. After the selection, switch the “Enable” to be
“ON”, then click “Submit” to validate the setting.
【
Remark
】
1. To scramble the encrypted programs (which already have CA descriptors in PMT), their CA
original CA descriptors will be replaced by new CA descriptor which are generated by
LAVISION-868FTA. For pass-through mode, those original CA descriptors will be persisted.
2. LAVISION-868FTA supports up to 4 CAS simul-
crypt. The CAS‟s AC information is available for
use only when the CAS is ON.
3. For different CAS, AC information may have different meanings.
4. To correctly scramble programs, the EMM PID of the transport stream and the ECM PID of the
programs should be correctly configured, as well as other CA parameters (see section
3.2.7.2.2).
When the status of scrambling is normal, the status light will display
, the ECM update time will show
the latest time for updating, as shown below:
Fig.60
Select AC information
Summary of Contents for Lavision-868FTA
Page 1: ...868FT MODE LAVISIO...