16
§
3.2.3.2 MAC setting
In the page of figure 11, input a right MAC address in the “MAC setting” bar, then click “submit” to set
LAVISION-868FTA
‟ MAC address.
Remark: TELELYNX
‟s products have the first 3 bytes “00:5C:B1” in the MAC address, that couldn‟t be
modified.
§
3.2.3.3 Parameter setting about system clock
Set time synchronization server
: In the page of figure 11, you can set IP address of network clock
server, auto synchronization time lag, auto syn
chronization switch in the “time synchronization protocol”
bar.
Remark: When you set a right network clock server address, LAVISION-868FTA will update his system
clock with the period which the user sets if SNTP service and network clock server are enabled.
Set system clock by manual operation:
In the page of figure 11, you can set manually the system
clock in the “date/time(UTC)” bar. And you can also click ”get UTC time”, then click ”submit” button to
finish setting.
Remark:
1. If the network clock server address has already configured and enabled, and the SNTP server works
properly, the device will get the system clock from the network clock server, at this time, the manually
configured clock will be invalid.
2. The device will keep the system clock according to its internal circuit after each manually
configuration; this clock circuit can work properly over two years without the external power supply.
3. Select the synchro-browser UTC clock to be the standard UTC(0zone) clock, and this clock may be
different from the clock shown on server, e.g. if the server clock is UTC+8:00, the final clock will be
differ about 8 hours.
Summary of Contents for Lavision-868FTA
Page 1: ...868FT MODE LAVISIO...