55
Fig.70
Output Channel Bit Rate Monitoring
Shown as figure 64, the left column displays the real-time bit rate of each channel; the right column
enable users to set the bit rate alarm setting, including lower limit, upper limit, and the enable switch
Lower Limit:
when the real-time bit rate is lower than this lower limit value, it will trigger an alarm.
Upper Limit:
when the real-time bit rate is higher than this upper limit value, it will trigger an alarm.
Enable Switch:
turn ON/OFF the alarm.
When finis
h the settings, click “Submit” button to validate them.
Click the
“sub channel 01” to see the PID and bit rate, as shown in the figure below:
Summary of Contents for Lavision-868FTA
Page 1: ...868FT MODE LAVISIO...
