TX Bluetooth
70
B. Base settings
Set dial mode
The default dialing mode is suitable for your country and network operator. It is unlikely that you
should need to change this setting unless advised to do so.
1. In standby mode, press
MENU/OK
then select
Settings
.
2. Select
Dial mode.
3. Select the dial mode from
Tone
and
Pulse.
4. Press
MENU/OK
to confirm.
Set the flash time
The default flash time is suitable for your country and network operator. It is unlikely that you
should need to change this setting unless advised to do so.
1. In standby mode, press
MENU/OK
then select
Settings
.
2. Select
Flash time
.
3. Select the flash time from
80ms
,
100 ms, 120 ms, 180 ms, 200 ms 250 ms, 300 ms
and
600 ms.
4. Press
MENU/OK
to save.
Change system PIN
1. In standby mode, press
MENU/OK
then select
Settings
.
2. Select
System PIN
.
3. Use the keypad to enter old 4-digit PIN (default 4-digit PIN is 0000).
4. Press
MENU/OK
then enter new 4-digit PIN.
5. Repeat step 4 to confirm your new PIN.
6. Press
MENU/OK
to confirm.
C. Caller ID
This product supports caller ID services provided by most telephone service providers. Depending
on your service subscription, you may see the caller’s number, or the caller’s name and number
from the telephone service provider after the first or second ring. Caller ID from the
HOME
line
allows you to see the name, number, date and time of the incoming calls. However, caller ID from
the
MOBILE
line only shows the number of the incoming caller; date and time of the call is not
shown. The caller ID may appear differently if the caller is matched to a phonebook entry.
Missed calls are marked with
xx Missed call(s)
. Each time you review a call list entry marked with
<
NEW CALL> icon
, the number of missed calls decreases by one. When you have reviewed all
the missed calls, the missed calls indicator no longer shows. You can review, redial, and copy an
entry into the phonebook. Entries appear in reverse chronological order. Only one handset can
review the call list at a time. If a handset tries to enter the call list while another handset is already
in it,
NOT AVAILABLE AT THIS TIME
appears.
The call list information might not be available for every incoming call. The callers might
intentionally block their names and/or telephone numbers.
Call list display screen messages
