TX Bluetooth
56
E. Paired devices
All paired devices are stored on the Paired devices list.
Up to four devices (one headset only) can be paired with the telephone base.
To use a paired device, it must be connected and on the active devices list.
Once you have paired a device with the telephone base, you do not need to repeat the pairing
procedure
again unless you delete the device from the paired devices list.
Note: Only the first 15 characters of the device name are shown on the paired devices list.
Rename a paired device
You can change the name of a paired device on the paired devices list.
1. In standby mode, Press
MENU/OK
and choose
Bluetooth
2. Select
Paired devices
,
3. Select the device you want to rename
4. Select
Rename
and Press
MENU/OK
5. The screen displays
ENTER NEW NAME
.
6. Use the keypad to edit the name
7. Press
MENU/OK
to confirm. The handset displays
Device renamed
.
Remove a paired device
If you want to add another Bluetooth device and you already have the maximum of four devices on
the paired devices list, you must first delete a device from the paired devices list.
1. In standby mode, Press
MENU/OK
and select
Bluetooth
2. Select
Paired devices
,
3. Select the device you want to remove
4. Select
Remove paired
.
5. The screen displays
Remove
device from paired list? Press Menu/OK
to confirm
6. The handset displays
Device removed from paired list
.
F. Active devices
Only devices on the active devices list can establish a Bluetooth connection with the telephone
base. Although two paired devices can be connected to the telephone base, only one Bluetooth
mobile phone or a headset can be on a call at a time.
Note: When adding, removing, or replacing a Bluetooth device on the active devices list, all
connected devices are temporarily disconnected until the procedure is complete. It may take up to
two minutes to reconnect.
Review the active devices list
1. In standby mode, Press
MENU/OK
and choose
Bluetooth
2. Select
Active devices
,
3. You can review the Active devices with
UP/DOWN
Connect/disconnect an active device
While in the active devices menu, you may connect or disconnect your active device.
1. In standby mode, Press
MENU/OK
and choose
Bluetooth.
2. Select
Active devices.
3. Select the device you wish to connect/disconnect
4. Press
MENU/OK
to select
Connect
or
Disconnect
5. Press
MENU/OK
to confirm. The handset displays
Device connected/Device
disconnected.
