TX Bluetooth
69
Set date and time
If you have subscribed to Caller ID service, the date and time is set automatically for all handsets
when you receive your first call. The date and time is recorded with each answering machine
message you receive. If you have not subscribed to Caller ID service, you can set the date and
time manually.
Date format
1. In standby mode, press
MENU/OK
then select
Settings
.
2. Select
Date format.
3. Select date format
DD/MM/YY
or
MM/DD/YY
.
4. Press
MENU/OK
to save your choice.
Time format
1. In standby mode, press
MENU/OK
then select
Settings
.
2. Select
Time format.
3. Select date format
12 - Hour
or
24 - Hour
.
4. Press
MENU/OK
to save.
Set date and time manually
1. In standby mode, press
MENU/OK
then select
Settings
.
2. Select
Set date/time.
3. Use the keypad to enter the date according to
DD-MM-YY
or
MM-DD-YY
format.
4. Press
MENU/OK
then use the keypad to enter the time according to
12-Hour
or
24-Hour
format.
5. Press
MENU/OK
to save the settings.
Auto answer
1. In standby mode, press
MENU/OK
then select
Settings
.
2. Select
Auto answer
.
3. Select
On or Off.
4. Press
MENU/OK
to confirm.
Note: As long as you have auto answer set to ON you can answer a call by lifting the handset C
the base.
If you have switched auto answer
OFF
, you will need to press
HOME
when you lift up the handset.
The default setting of Auto Answer is ON.
Handset reset
1. In standby mode, press
MENU/OK
then select
Settings
.
2. Select
Reset
.
3. Use the keypad to enter 4-digit PIN (default 4-digit PIN is 0000).
4. Confirm by
MENU/OK
. The display shows
Reset to default settings?
5. Press again
MENU/OK
to confirm.