TX Bluetooth
64
3. Press
MUTE/REMOVE
to delete the selected entry.
Find handset (Paging)
You can ring a handset to help locate it.
1. Press PAGE on the base. All idle handsets ring and display
** Paging **
.
2. Press PAGE on the base again to stop the paging, or press
HOME
,
SPEAKER
,
MOBILE
or
any dial pad key (0-9, *, or #) on any handset.
H. Ringers
Temporary ringer silencing
When the telephone is ringing, you can temporarily silence the ringer of the handset or telephone
base without disconnecting the call. The next call rings normally at the preset volume.
To silence the handset ringer:
Press C or
MUTE/REMOVE
on the handset and
Ringer muted
appears.
To silence the base ringer:
Press
VOLUME-
on the telephone base until L0 displayed in base LED.
Note: Each handset will ring when there is an incoming call unless the ringer volume is turned off.
Pressing C or
MUTE/REMOVE
on one handset will only silence the ringer of that particular
handset.
I.Chain dialing
This feature allows you to initiate a dialing sequence from numbers stored in the phonebook, call
list history or redial list while you are on a call.
Chain dialing can be useful if you wish to access numbers other than phone numbers (such as
bank account information or access codes) from the phonebook, call list history or redial list.
To access a number in the phonebook while on a call:
1.
Press
MENU/OK
then select
Phonebook
.
2.
Select
Home
phonebook.
3.
Scroll to the desired entry or perform an alphabetical search
4.
Press
MENU/OK
to dial the displayed number.
To access a number in the call log while on a call:
1. Select
Call log
.
2. Select the desired call list entry.
3. Press
MENU/OK
to dial the displayed number.
To access the redial list while on a call:
1. Press
REDIAI/PAUSE
.
2. Press
UP, DOWN
or
REDIAI/PAUSE
until the desired number displays.
3. Press
MENU/OK
. If you do not press
MENU/OK
within two seconds, the number displayed
is dialed automatically.