Telefunken TF3236HX880LU, Operating Instructions Manual

Page: 91 / 103

English - 88 -
Ext Out
Press the “ ” or “ ” buttons to select Ext Out.
Use the “ ” or “ ” buttons to set the Ext Out
as On or Off.
Note :
For copying from a DVD or VCR device, you should
choose desired source from source menu and turn
“On” to EXT Out from feature menu.
Full Mode (optional)
If you connect a device via HDMI or YPbPr
connectors and set 1080i/1080P resolutions,
Full Mode item will be visible.You can set Full
Mode as 1:1 or Normal by using “ ” or “ ”.If you
select 1:1, screen ratio will be adjusted correctly.
If you set Normal, screen ratio may expand.
Install Menu
Program
Press the “ ” or “ ” buttons to select Program.
Use the “ ” or “ ” buttons to select the program
number. You can also enter a number using the
numeric buttons on the remote control. There
is a 200 programmes storage between 0 and
199.
Band
The Band can be selected either C or S. Press
the “ ” or “ ” buttons to set the Band.
Channel
Channel can be changed by the “ ” or “ ”
buttons or numeric buttons.
Colour System
Press the “ ” or “ ” buttons to select Colour
System. Use the “ ” or “ ” buttons to change
the colour system to PAL, PAL 60, SECAM or
AUTO.
Sound System
Press the “ ” or “ ” buttons to select Sound
System. Press the “ ” or “ ” buttons to change
the sound system to BG,DK, I, L or L’.
Fine Tune
Press the “ ” or “ ” buttons to select Fine
Tune. Press the “ ” or “ ” buttons to adjust
the tuning.
Search
Press the “ ” or “ ” buttonsto select Search.
Use the “ ” or “ ” buttons to start programme
searching. You can also enter the desired
frequency using the numeric buttons while the
Search item is highlighted.
Store
Press the “ ” or “ ” buttons to select Store.
Press “ ” or the
OK button to store the settings.
“ Stored... ” will be displayed on the screen.
Install Menu in AV Modes
The following screen appears in the install menu
when the TV is in AV modes. Note that limited
options will be available. Switch to TV mode for
viewing complete version of the
Install menu.
Colour System
Press the “ ” or “ ” buttons to select Colour
System . Use the “ ” or “ ” buttons to change
the colour system to PAL, SECAM, PAL60,
AUTO, NTSC 4,43 or NTSC 3,58.
Store
Press the “ ” or “ ” buttons to select Store
Program . Press “ ” or the OK button to store
the settings. “ Stored... ” will be displayed on
the screen.
A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 37 A02_[GB]_MB36_HDIDTV-MPEG4_BRONZE8_32880W_1810UK_10065239-50156446.indd 37 26.09.2009 17:00:39 26.09.2009 17:00:39