(17) keys to increase or decrease the
contrast. There are five contrast degrees.
Press the DESACTIVAR/SALIR (4) key to return to the
previous menu.
Selecting the time
and date
Press the MARCAR/MENU (18) key until the message
PULSE HORA/FEC appears on the screen.
PULSE HORA/FEC.
With the
receiver down
, type the time and date on
the keypad. Complete all the numbers. If you make a
mistake, press BORRAR (14)
For example: If it is 20:00 November 2, you will have to
type – 20:00 02 11.
PULSE HORA/FEC.
20.00 02 11
Once you have typed the last digit correctly, the new
date and time will be displayed on the screen. If for
any reason the function is not completed, the previous
time and date will remain on the screen.
When you have entered the time and date, you can
proceed with the next menu function by pressing the
MARCAR/MENU (18) key or return to the usual
telephone display by pressing the
DESACTIVAR/SALIR (4) key.
If you have activated the Call Identification service, the
time and date of each call received will be recorded
automatically.
If you accidentally delete the time and date, you will
need to reset it following the instructions above.
Tone confirmation
This feature activates the tone key function – this
means that a tone will sound each time a key is
pressed on the main keypad.
Press the MARCAR/MENU (18) key until one of the
following messages appears on the screen. If the beep
tone is activated the screen will display (SONIDO
TECLA: SI).
SONIDO TECLA: SI
If the beep tone is de-activated, the screen will display
(SONIDO TECLA: NO).
SONIDO TECLA: NO
Using the
(17) keys activates and de-activates
the key tone (signal).
Press the DEACTIVATE/SALIR (4) key to exit and
return to the standard display.
Correct and incorrect
tones
This option allows you to listen to the correct or
incorrect tones. The correct tone is a long tone which
indicates that the function has been properly executed
.If the function has been incorrectly executed you will
hear three short tones.
