Install
Tele
Tele
Tele
Tele
Eye RX with Alarm Sensors and Relay Control Port
2. Network Setup
2.1. TCP/IP Setup
2.1.1. TCP/IP Setup Through On Screen Display (OSD) Menu
1.
Press
[Menu]
button on RX video recording server front panel or remote control, select
[SETUP]
[CONNECTION]
[TCP/IP]
2.
Select
“NO”
for
[Auto IP]
if you want to change IP address, mask or gateway
3.
Use
[
↑
↑
↑
↑
]
and
[
↓
↓
↓
↓
]
buttons to set IP address, mask or gateway.
4.
Wait for the system to save the setting
2.1.2. TCP/IP Setup Through Network
A. IP Setup Utility
1.
Install TeleEye IP Setup Utility software using the bundled CD. .NET framework is needed
for IP Setup Utility operation. You can find .NET framework installer in RX software CD.
2.
Run IP Setup Utility
3.
Find your RX video recording server according to the series number provided by your
provider.
4.
To assign another IP address, mask or gateway, click to uncheck “
Obtain an IP address
automatically
” and enter the corresponding information.
5.
Make sure the gateway is the same as your router.
6.
Click on
[Apply]
to save the changes
B. Web Browser
1.
Type in the IP address plus port number (
http://IPAddress:Port
) in web browser address bar
or use TeleEye IP Setup Utility to access RX web page
2.
Click on
[Menu]
[Server Setting]
, select
[Network]
