Teledyne TIENet 360 LaserFlow Ex, Installation And Operation Manual

Page: 131 / 140

TIENet™ 360 LaserFlow™ Velocity Sensor
D-5
101 Christine Drive
Belen, New Mexico 87002
Phone: (505) 864-6691
Fax: (505) 861-2355
MATERIAL SAFETY DATA SHEET -- September 28, 1998
SORB-IT
®
Packaged Desiccant
ISO 9002
SECTION IX -- SPECIAL PRECAUTIONS
Avoid breathing dust and prolonged contact with skin. Silica gel dust causes eye irritation
and breathing dust may be harmful.
* No Information Available
HMIS (Hazardous Materials Identification System) for this product is as
follows:
Health Hazard 0
Flammability 0
Reactivity 0
Personal Protection HMIS assigns choice of personal protective equipment to the
customer, as the raw material supplier is unfamiliar with the
condition of use.
The information contained herein is based upon data considered true and accurate. However, United Desiccants makes no warranties
expressed or implied, as to the accuracy or adequacy of the information contained herein or the results to be obtained from the use
thereof. This information is offered solely for the user's consideration, investigation and verification. Since the use and conditions of
use of this information and the material described herein are not within the control of United Desiccants, United Desiccants assumes no
responsibility for injury to the user or third persons. The material described herein is sold only pursuant to United Desiccants' Terms
and Conditions of Sale, including those limiting warranties and remedies contained therein. It is the responsibility of the user to
determine whether any use of the data and information is in accordance with applicable federal, state or local laws and regulations.