PS200
PORTABLE GAS MONITOR
INTRODUCTION
64171, Rev. 11/December 2019
2-3
2.2. Features
• Compact, lightweight and robust.
• Measurement and display of up to 4 gases.
• Simple 2 button operation.
• Audible, visual (hi-viz) flashing LED’s and vibrating alarms.
• Audible and visual confidence signal (configurable), confirming monitor operation to the user.
• Green display during normal operation and red during alarm condition.
• Internal pump (optional).
• Manual and automatic data logging.
• Internal Li-Ion (Lithium Ion) rechargeable battery.
• Maximum recharge time of 4 hours.
• Robust clip to allow fitting to belt, pocket, etc.
• Communications interface to allow downloading of stored data.
• Fully certified to international standards.
• Comprehensive range of accessories .
• Quick Configuration Display allows the configuration to be viewed without fully switching the
monitor ON.
Typical operating parameters are detailed in
Section APPENDIX A. OPERATING PARAMETERS &
2.3. Datalogging
Datalogging allows gas measurements, event logs, bump tests, and calibration details to be stored
for downloading to a PC / Laptop via a USB connection. Typically, the monitor can store up to 6
months of data (refer to
Section APPENDIX A. OPERATING PARAMETERS & SENSOR TYPES
).
2.3.1. ACCESSING LOGGED DATA
Download data from the monitor to a PC/Laptop using the standard charging / comms cable and
additional software. Contact Technical Support (refer to
) for fur
-
ther details.
2.4. Filters
Filters protect the monitor from water and dust ingress. Check filters regularly and replace as nec
-
essary (refer to
).