Teledyne Princeton Instruments Nano-XF, System Manual

Page: 13 / 56

Chapter 2 Nano-XF Camera System 13
2.3 MegaPlus® Multi-Head Controller
Front Panel
The camera connects to the camera controller via factory supplied cables. The
controller has four Remote Head 18-pin connectors.
CAUTION!
!
Make sure the controller power switch (on the rear) is at the
OFF position before connecting the cables!
NOTE:
Due to the high resolution of the Nano-XF camera, only one
head is supported with this controller.
See Figure 2-3 .
Figure 2-3: MegaPlus Multi-Head Controller Front Panel
Rear Panel
CAUTION!
!
Make sure the controller power switch is at the OFF position
before connecting the cables!
Figure 2-4 illustrates the rear panel.
Figure 2-4: MegaPlus Multi-Head Controller Rear Panel
• Power
A Lemo
®
EPG.0B.302.HLN receptacle.
• On/Off Switch
Toggle switch to turn the Controller on or off. Always turn the controller off
before plugging or unplugging cables.
4
4
11-
01
16
_005
4
4
11-
011
6
_
006