Teledyne PIXIS-XF, System Manual

Page: 85 / 116

Chapter 7 Troubleshooting 85
7.12 Device is Occupied
Multiple instances of LightField can be running at the same time. However, a device
currently being used by one instance of LightField will be shown in the Available Devices
area as Occupied for all other instances of LightField. See
Figure 7-7 .
Figure 7-7: Typical LightField Occupied Device Icon
To make a device available to the current instance of LightField, either remove it from
the Experiment Devices area in the other instance or close the instance that is using the
device.
7.13 Error Creating Controller Message
Figure 7-8: Typical WinSpec/32 Error Creating Controller Dialog
This message may appear if the
PVCAM.INI
file has become corrupted or if the camera
was not turned on before you started the WinX/32 application and began running the
Camera Detection wizard. If one of these dialogs pops up:
1. Refer to
Section 7.5, Controller Is Not Responding , on page 80.
2. Run the Camera Detection Wizard.
4
4
11
-0
112_
005
3
4
4
11-
011
2
_005
4