Teledyne PIXIS-XF, System Manual

Page: 28 / 116

28 PIXIS-XF System Manual Issue 5
4.2 Verify Equipment and Parts Inventory
Confirm that you have all of the equipment and parts required to set up the PIXIS-XF
system.
A standard system consists of:
• Camera and Power Supply
• CoolCUBE
II
Circulator and hoses (for liquid-cooled system)
• Host Computer
Can be purchased from Teledyne Princeton Instruments or provided by user.
For enhanced performance, a fast hard drive (10,000 rpm) and 2 GB RAM is
recommended.
• Operating System:
— WinView/32 or WinSpec/32: Windows XP (32-bit, SP3 or later) or Vista
(32-bit required)
— LightField: Windows Vista (64-bit) or Windows 7 (64-bit)
• USB cable: Five (5) meter cable (6050-0494) is standard.
• PIXIS-XF System Manual
Available options include:
• Application Software:
— WinView/32 or WinSpec32 (Version 2.5.25 or later) CD-ROM and User
Manual
— LightField CD-ROM and User Manual
• Shutter connector and Teledyne Princeton Instruments 25 mm external shutter
• Fiber Optic Extender Kit
4.3 System Requirements
Environmental Requirements
• Storage temperature:
≤
55°C
• Operating environment temperature: +5°C to +30°C; the environment
temperature range over which system specifications can be guaranteed is
+18°C to +20°C
• Relative humidity 50%; non-condensing
NOTE:
The cooling performance may degrade if the room
temperature is above +20°C.
Ventilation
Allow at least one inch clearance for the side air vents. Where the camera is
inside an enclosure, < 30 cfm air circulation and heat dissipation of 100 W is
required.
Power:
The PIXIS-XF camera receives its power from the supplied power supply, which
in turn plugs into an AC power source.