Teledyne PIXIS-XF, System Manual

Page: 64 / 116

64 PIXIS-XF System Manual Issue 5
6.1.4 EXT SYNC Trigger Input
The selected Timing Mode {Trigger Response} determines how the camera will respond
to an External Sync pulse that is input at the EXT SYNC connector on the rear of the
camera. Things to keep in mind when setting up the External Sync pulse input are:
• Pulse Height
0 to +3.3-5 V
DC
logic levels (TTL-compatible)
• Pulse Width (trigger edge frequency)
The time between trigger edges.
• EXT SYNC Connector Impedance
High impedance
• Trigger Edge
+ (rising) or - (falling) edge must be indicated on the Experiment Setup
►
Timing tab {Trigger/Shutter expander}
Figure 6-8 illustrates the rear panel connectors on the PIXIS-XF.
Figure 6-8: Rear View of PIXIS-XF Camera
4
4
11
-0
112
_0032