Teledyne CP030, Operator'S Manual

Page: 28 / 32

CP03x/CP03xA Current Probes
22
Certifications
Teledyne LeCroy certifies compliance to the following standards as of the date of
publication. As standards evolve, these may no longer be current. Please see the
Declaration of Conformity certificate shipped with your product.
EMC Compliance
EC Declaration of Conformity - EMC
The CP030, CP030A, CP031, and CP031A probes meet the intent of EC Directive
2014/30/EU for Electromagnetic Compatibility. Compliance was demonstrated to the
following specifications as listed in the Official Journal of the European Communities:
EN 61326-1:2013 EMC requirements for electrical equipment for measurement, control,
and laboratory use.
1
E
LECTROMAGNETIC EMISSIONS
:
EN 55011/A1:2010 Radiated and Conducted Emissions Group 1 Class A
2 3
E
LECTROMAGNETIC
I
MMUNITY
:
EN 61000-4-2:2009 Electrostatic Discharge, 4 kV contact, 8 kV air, 4 kV
vertical/horizontal coupling planes
4
EN 61000-4-3/A2:2010 RF Radiated Electromagnetic Field, 3 V/m, 80-1000 MHz; 3 V/m,
1400 MHz - 2 GHz; 1 V/m, 2 GHz - 2.7 GHz
EN 61000-4-8:2010 Power Frequency Magnetic Field, 3 A/m, 50 Hz; 3 A/m, 60 Hz
1 To ensure compliance with the applicable EMC standards, use high quality shielded interface cables.
2 This product is intended for use in nonresidential areas only. Use in residential areas may cause electromagnetic
interference.
3 Emissions which exceed the levels required by this standard may occur when the probe is connected to a test object.
4 Meets Performance Criteria “B” limits of the respective standard: during the disturbance, product undergoes a
temporary degradation or loss of function or performance which is self-recoverable.