Teledyne 7 RU Chassis, Operation Manual, Page: 47 / 144

Operations Manual, 7RU SSPA Chassis 208528 REV M 47
3.3 Operation Setup Sub-Menu
This menu, shown in
Figure 3-5 , allows the user to select system-specific options.
3.3.1 Info
Shows the current firmware version. See
Figure 2-5 and Section 3.1.15 through Section
3.1.17 .
3.3.2 Buzzer
Toggles the audible alarm buzzer on/off. Factory default is Enabled.
3.3.3 Mute
Allows user to Set or Clear the Mute status for the unit. Muting the amplifier via remote M&C
requires 70 msec maximum (30 msec typical).
3.3.4 Sys. Mode
Selects the logical state machine used by the controller. Available choices are:
•
Standalone – Select this option for standalone SSPA application. All RF wave-
guide switch controls are disabled;
•
1:1 Redundancy – Select this option for classic internal 1:1 redundancy appli-
cation. For proper function, a second SSPA is required and also needs to be
configured for the same operation mode. Other settings may need to be select-
ed, see internal 1:1 operation section for details;
•
1:2 Mode – This setting is used for the internal 1:2 redundancy operation sche-
ma. See relevant section for operation details;
•
PhComb – Mode used for hybrid 1:1 phase combined operation. Use of N+1
controls is recommended in conjunction is highly recommended. See 1:1 phase
combined operation section for details;
2.Com Setup 1.Sys Info
2.Buzzer
3.Operation 4.Flt. Setup 5.Options
1.Info
Main Menu
6.Redundancy
3.Mute 4.Sys.Mode 5.Attenuation 6.RF Units
1.StdAlone
0.0 .. 20.0 dB
2. 1:1 Mode 1.Buzzer On 2.Buzzer Off
1.Mute On 2.Mute Off
3. 1:2 Mode
1.dBms 2. Watts To SSPA Firmware Info Page
4.1:1 PhComb 5.1:2 PhComb 6.SinglSw
Figure 3-5: Operation Setup Sub-Menu