Teledyne 7 RU Chassis, Operation Manual, Page: 137 / 144

Operations Manual, 7RU SSPA Chassis 208528 REV M 137
10. Set the RM SSPA unit to communicate over IPNet.
a. From the unit’s front panel, press the Main Menu key; select 2.Com.Setup and
press the Enter key; select 4.Interface and press the Enter key; select 3.IPNet and
press the Enter key.
The RM SSPA is now set up to work with Ethernet Interface.
11. Ping the SSPA unit from host PC:
C:\>ping 192.168.0.0
This will display:
Pinging 192.168.0.0 with 32 bytes of data:
Reply from 192.168.0.0: bytes=32 time<10ms TTL=128
Reply from 192.168.0.0: bytes=32 time<10ms TTL=128
Reply from 192.168.0.0: bytes=32 time<10ms TTL=128
Reply from 192.168.0.0: bytes=32 time<10ms TTL=128
Ping statistics for 192.168.0.3:
Packets: Sent=4, Received=4, Lost=0 (0%loss),
Approximate round trip times I milli-seconds:
Minimum=0ms, Maximum=0ms, Average=0ms
12. Run the Paradise Datacom Universal M&C package on the host PC to check all M&C
functions. Refer to Appendix C for details on the unit specifications. When prompted,
select an Internet connection to the unit using IP Address 192.168.0.0, local port address
to 1039 and remote port address to 1038.
13.The SSPA now connected to your host workstation for remote M&C.