Trace Oxygen Analyzer
Maintenance
Teledyne Analytical Instruments
55
Preamp
0
OK
1
Zero too high
2
Amplifier output doesn't match test input
3
Both Failed
5.5 Major Internal Components
The zirconium sensor is accessed by unlatching and swinging open
the front panel, as described earlier. Other internal components are
accessed by removing the rear panel and sliding out the entire chassis.
See Figure 5-4, below. The gas piping is illustrated in Figures 2-1 and
Figure 2-2 and the major electronic components locations are shown in
Figure 2-3, in Chapter 2.
WARNING:
SEE WARNINGS ON THE TITLE PAGE OF THIS
MANUAL.
Figure 5-4: Rear Panel Removal
(Remove only those screws marked with an X)
The 3000ZA contains the following major components:
Summary of Contents for 3000ZA
Page 24: ...Operational Theory 3000ZA Teledyne Analytical Instruments 12 Figure 2 3 Component Location...
Page 63: ...Trace Oxygen Analyzer Operation Teledyne Analytical Instruments 51...
Page 77: ...Trace Oxygen Analyzer Appendix Teledyne Analytical Instruments 1 SCFH 0 476 SLPM...
Page 81: ...Trace Oxygen Analyzer Index Teledyne Analytical Instruments...